MP-Series Low Inertia Servo Motor Installation Instructions
19
Publication MP-IN002C-EN-P - April 2009
LB
(1)
mm
(in.)
(1)
For motors with a brake, for example MPL-B
xxx
-
xxx
4AA, add to MPL-B6
xx
dimensions LB, LD. and LE: 108.0 mm (4.25 in.); to
MPL-B8
xx
dimensions LB, LD. and LE:107.9 mm (4.26 in.); and to MPL-B9
xx
dimensions LB, LD 127.0 mm (5.0 in.).
LD
(1)
mm
(in.)
LE
(1)
mm
(in.)
M
mm
(in.)
N
(2)
mm
(in.)
(2)
Tolerance for the dimension is MPL-B6
xx
+0.014, -0.011 mm, (+0.0005, -0.0005 in.); MPL-B8
xx
+0.016, -0.013 mm, (+0.0006,
-0.0005 in.); MPL-B9
xx
+0.016, -0.013 mm, (+0.0005, -0.0006 in.).
P
mm
(in.)
S
(3)
mm
(in.)
(3)
Tolerance for the dimension is MPL-B6
xx
+0.43 mm (±0.008 in.); MPL-B8
xx
and MPL-B9
xx
+0.52 mm (±0.010 in.).
T
mm
(in.)
Shaft End
Threaded Hole
mm (in.)
223.8
(8.81)
183.6
(7.23)
112.5
(3.15)
215.0
(8.465)
180.0
(7.0867)
184.9
(7.28)
14.50
(0.579)
3.73
(0.147)
M12 x 1.75- 6H
thread depth
28 (1.10)
274.6
(10.81)
234.4
(9.23)
163.3
(6.43)
325.4
(12.81)
285.2
(11.23)
214.1
(8.43)
284.4
(17.45)
242.6
(9.55)
171.4
(6.75)
265.0
(10.433)
230.0
(9.0551)
230.0
(9.25)
3.86
(0.152)
M16 x 2- 6H
thread depth
36 (1.42)
335.2
(13.20)
293.4
(11.55)
222.2
(8.75)
293.3
(11.55)
248.9
(9.80)
177.9
(7.0)
300.0
(11.811)
250.0
(9.8426)
266.7
(10.50)
18.50
(0.738)
4.88
(0.192)
M16 x 2- 6H
thread depth
36 (1.42)
344.1
(13.55)
299.7
(11.80)
228.7
(9.0)