PowerFlex Digital DC Drive User Manual -
Publication 20P-UM001C-EN-P - July 2008
4-2
Troubleshooting
Drive Status
The condition or state of your drive is constantly monitored. Any changes
will be indicated through the LEDs and/or the HIM (if present).
Figure 4.1 Drive Status Indicators
#
Name
Color
State
Description
➊
STS
(Status)
Green
Flashing
Drive ready, but not running and no faults are present.
Steady
Drive running, no faults are present.
Yellow
Flashing,
Drive Stopped
A condition exists that is preventing the drive from
starting. Check parameters
[Start Inhibits] and/or
[Drive Alarm 1].
Flashing,
Drive Running
An intermittent type 1 alarm condition is occurring.
Check parameter
[Drive Alarm 1]. Refer to
.
Steady,
Drive Running
A continuous type 1 alarm condition exists. Check
parameter
[Drive Alarm 1]. Refer to
.
Red
Flashing
A fault has occurred. Check [Fault x Code] or view the
Fault Queue on the HIM. Refer to
.
Steady
A non-resettable, non-configurable fault has occurred.
Check [Fault x Code] or view the Fault Queue on the
HIM. Refer to
Fault Descriptions on page 4-4
.
➋
PORT
Refer to the Communication
Adapter User Manual.
Status of DPI port internal communications (if present).
MOD
Status of communications module (when installed).
NET A
Status of network (if connected).
NET B
Status of secondary network (if connected).
➊
➋
STS
PORT
MOD
NET A
NET B
