Rockwell RD3110K.1, Manual

7

130W MINI DRILL  

 EN

b)  Use personal protective equipment. Always wear 

eye protection. 

Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will 

reduce personal injuries. 

c)  Prevent unintentional starting. Ensure the 

switch is in the off-position before connecting to 

power source and/or battery pack, picking up or 

carrying the tool. 

Carrying power tools with your 

finger on the switch or energising power tools that 

have the switch on invites accidents. 

d)  Remove any adjusting key or wrench before 

turning the power tool on. 

A wrench or a key left 

attached to a rotating part of the power tool may 

result in personal injury. 

e)  Do not overreach. Keep proper footing and 

balance at all times. 

This enables better control of 

the power tool in unexpected situations. 

f)  Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves 

away from moving parts. 

Loose clothes, jewellery 

or long hair can be caught in moving parts.

g)  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these 

are connected and properly used. 

Use of these 

devices can reduce dust-related hazards. 

4.  POWER TOOL USE AND CARE 
a)  Do not force the power tool. Use the correct 

power tool for your application. 

The correct power 

tool will do the job better and safer at the rate for 

which it was designed. 

b)  Do not use the power tool if the switch does not 

turn it on and off. 

Any power tool that cannot be 

controlled with the switch is dangerous and must 

be repaired.

c)  Disconnect the plug from the power source and/

or the battery pack from the power tool before 

making any adjustments, changing accessories, 

or storing power tools. 

Such preventive safety 

measures reduce the risk of starting the power tool 

accidentally. 

d)  Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the 

power tool or these instructions to operate the 

power tool. 

Power tools are dangerous in the hands 

of untrained users. 

e)  Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and 

any other condition that may affect the power 

tools operation. If damaged, have the power tool 

repaired before use. 

Many accidents are caused 

by poorly maintained power tools. 

f)  Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control. 

g)  Use the power tool, accessories and tool bits etc. 

in accordance with these instructions and in the 

manner intended for the particular type of power 

tool, taking into account the working conditions 

and the work to be performed. 

Use of the power 

tool for operations different from those intended 

could result in a hazardous situation. 

5. SERVICE 

a)  Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts. 

This will ensure that the safety of the power 

tool is maintained.

SAFETY INSTRUCTIONS FOR ALL 

OPERATIONS

Safety Warnings common for grinding, sanding, wire 

brushing, polishing, carving or abrasive cutting-off 

operations:
 a)   This power tool is intended to function as a 

grinder, sander, wire brush, polisher, carving 

or cut-off tool.  Read all safety warnings, 

instructions, illustrations and specifications 

provided with this power tool.    

Failure to follow 

all instructions listed below may result in electric 

shock, fire and/or serious injury.

b)   Do not use accessories which are not 

specifically designed and recommended by the 

tool manufacturer.

Just because the accessory 

can be attached to your power tool, it does not 

assure safe operation.

c)   The rated speed of the grinding accessories 

must be at least equal to the maximum speed 

marked on the power tool.

 Grinding accessories 

running faster than their rated speed can break 

and fly apart.

d)   The outside diameter and the thickness of your