Rockwell RK2856, User Safety And Operating Instructions

20V LI DRILL DRIVER  

 ENG

7

be controlled with the switch is dangerous and must 
be repaired.

c)  Disconnect the plug from the power source 

and/or the battery pack from the power tool 
before making any adjustments, changing 
accessories, or storing power tools. 

Such 

preventive safety measures reduce the risk of 
starting the power tool accidentally.

d)  Store idle power tools out of the reach of 

children and do not allow persons unfamiliar 
with the power tool or these instructions 
to operate the power tool.

 Power tools are 

dangerous in the hands of untrained users.

e)  Maintain power tools. Check for misalignment 

or binding of moving parts, breakage of parts 
and any other condition that may affect the 
power tools operation. 

If damaged, have the 

power tool repaired before use. Many accidents are 
caused by poorly maintained power tools.

f)  Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges 
are less likely to bind and are easier to control.

g)  Use the power tool, accessories and tool bits 

etc., 

in accordance with these instructions and in 

the manner intended for the particular type of power 
tool, taking into account the working conditions and 
the work to be performed. Use of the power tool for 
operations different from those intended could result 
in a hazardous situation.

5.  BATTERY TOOL USE AND CARE

a)  Recharge only with the charger specified by 

the manufacturer. 

A charger that is suitable for 

one type of battery pack may create a risk of fire 
when used with another battery pack.

b)  Use power tools only with specifically 

designated battery packs. 

Use of any other 

battery packs may create a risk of injury and fire.

c)  When battery pack is not in use, keep it away 

from other metal objects, like paper clips, 
coins, keys, nails, screws or other small metal 
objects, that can make a connection from 
one terminal to another. 

Shorting the battery 

terminals together may cause burns or a fire.

d)  Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. If 
contact accidentally occurs, flush with water.

If liquid contacts eyes, additionally seek medical 
help. Liquid ejected from the battery may cause 
irritation or burns.

6. SERVICE

a)  Have your power tool serviced by a 

qualified repair person using only identical 
replacement parts. 

This will ensure that the 

safety of the power tool is maintained.

DRILL SAFETY WARNINGS

1.  Hold power tool by insulated gripping 

surfaces, when performing an operation 
where the fastener may contact hidden 
wiring.

 Fasteners contacting a “live” wire may 

make exposed metal parts of the power tool live and 
could give the operator an electric shock.

GENERAL SAFETY WARNINGS 
FOR BATTERY PACK

1)  WARNING: Risk of fire and burns. Do not 

disassemble, heat above 100°C (212°F), or 
incinerate. Do not expose cells or batteries to 
heat or fire. Avoid storage in direct sunlight.

2)  Dispose of used batteries promptly according 

to local recycling or waste regulations. 

3)  Dispose of used battery promptly. Do not 

dispose of in fire.

4)  Keep battery out of reach of children and in 

original package until ready to use. 

5)  Never put batteries in mouth. If swallowed, 

contact your physician or local poison control 
center.

6)  CAUTION – The battery used in this device 

may present a risk of fire or chemical burn if 
mistreated. Replace battery with (ROCKWELL 
20 V) only. Use of another battery may present 
a risk of fire or explosion.

7)  Warning: Do not use a visibly damaged battery 

pack or appliance as applicable.

8)  Warning: Do not modify or attempt to 

repair the appliance or the battery pack as 
applicable.

9)  BATTERY MUST BE RECYCLED.
10) Recharge only with the charger specified by 

the manufacturer.

 A charger that is suitable for