Rockwell RK4248K, Manual

6

RANDOM ORBIT SANDER 

 ENG

or serious injury. 

Save all warnings and instructions for future 
reference.

The term power tool in the warnings refers to your 
electric (corded) power tool or battery-operated 
(cordless) power tool.

1.  WORK AREA SAFETY
a)  Keep work area clean and well lit. 

Cluttered or 

dark areas invite accidents.

b)  Do not operate power tools in explosive 

atmospheres, such as in the presence of 
flammable liquids, gases or dust. 

Power tools 

create sparks which may ignite the dust or fumes.

c)  Keep children and bystanders away while 

operating a power tool. 

Distractions can cause 

you to lose control.

2.  ELECTRICAL SAFETY
a)  Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 
adapter plugs with grounded power tools. 

Unmodified plugs and matching outlets will reduce 
risk of electric shock.

b)  Avoid body contact with grounded surfaces 

such as pipes, radiators, ranges and 
refrigerators. 

There is an increased risk of electric 

shock if your body is grounded.

c)  Do not expose power tools to rain or wet 

conditions. 

Water entering a power tool will 

increase the risk of electric shock.

d)  Do not abuse the cord. Never use the cord 

for carrying, pulling or unplugging the power 
tool. Keep cord away from heat, oil, sharp 
edges or moving parts. 

Damaged or entangled 

cords increase the risk of electric shock.

e)  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. 

Use of 

a cord suitable for outdoor use reduces the risk of 
electric shock.

f)   If operating a power tool in a damp location 

is unavoidable, use a residual current device 
(RCD) protected supply. 

Use of an RCD reduces 

the risk of electric shock.

3.  PERSONAL SAFETY

a)  Stay alert, watch what you are doing and use 

common sense when operating a power tool. 
Do not use a power tool while you are tired 
or under the influence of drugs, alcohol or 
medication. 

A moment of inattention while operating 

power tools may result in serious personal injury.

b)  Use personal protective equipment. Always 

wear eye protection. 

Protective equipment such 

as a dust mask, non-skid safety shoes, hard hat, or 
hearing protection used for appropriate conditions 
will reduce personal injuries.

c)  Prevent unintentional starting. Ensure the 

switch is in the off-position before connecting 
to power source and/or battery pack, picking 
up or carrying the tool. 

Carrying power tools with 

your finger on the switch or energizing power tools 
that have the switch on invites accidents. 

d)  Remove any adjusting key or wrench before 

turning the power tool on. 

A wrench or a key left 

attached to a rotating part of the power tool may 
result in personal injury.

e)  Do not overreach. Keep proper footing and 

balance at all times. 

This enables better control 

of the power tool in unexpected situations.

f)  Dress properly. Do not wear loose clothing or 

jewelry. Keep your hair, clothing and gloves 
away from moving parts. 

Loose clothes, jewelry 

or long hair can be caught in moving parts.

g)  If devices are provided for the connection of 

dust extraction and collection facilities, ensure 
these are connected and properly used. 

Use of 

dust collection can reduce dust-related hazards.

4.  POWER TOOL USE AND CARE
a)  Do not force the power tool. Use the correct 

power tool for your application. 

The correct 

power tool will do the job better and safer at the rate 
for which it was designed.

b)  Do not use the power tool if the switch does 

not turn it on and off. 

Any power tool that cannot 

be controlled with the switch is dangerous and must 
be repaired.

c)  Disconnect the plug from the power source 

and/or the battery pack from the power tool 
before making any adjustments, changing 
accessories, or storing power tools. 

Such 

preventive safety measures reduce the risk of