Rockwell ShopSeries RS4002, Manual

Palm SandeR 

 en

4

COmPOnenT lIST

 Handle

On/Off wITCH

SandIng Pad

SandIng PaPeR *

VaCuum adaPTOR

*not all the accessories illustrated or described are included in standard delivery.

1

2

3

4

5

aCCeSSORIeS

Sanding paper(4pcs 80grit, 4pcs 100grit, 2pcs 120grit)    10
dust extraction adaptor 32mm 

1

Use good quality accessories marked with a 
well-known brand name. Choose the type according 
to the work you intend to undertake. Refer to the 
accessory packaging for further details. Store 
personnel can assist you and offer advice.

geneRal POweR TOOl SafeTy 

waRnIngS

waRnIng:

Read all safety warnings and all 

instructions.

 Failure to follow the warnings 

and instructions may result in electric shock, fire and/
or serious injury.

Save all warnings and instructions for future 

reference.

The term “power tool” in the warnings refers to your 
mains-operated (corded) power tool or battery-
operated (cordless) power tool.

1.   wORk aRea SafeTy

a)   keep your work area clean and well lit. 

Cluttered 

or dark areas invite accidents.

b)  do not operate power tools in explosive 

atmospheres, such as in the presence of 

flammable liquids, gases or dust.

Power tools 

create sparks which may ignite the dust or fumes.

c)   keep bystanders, children, and visitors away 

while operating a power tool. 

distractions can 

cause you to lose control.

2.  eleCTRICal SafeTy

a)   Power tool plugs must match the outlet. never 

modify the plug in any way. do not use any 

adapter plugs with earthed (grounded) power 

tools.

Unmodified plugs and matching outlets will 

reduce risk of electric shock.

b)   avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges 

and refrigerators. 

There is an increased risk of 

electric shock if your body is earthed or grounded.

c)   do not expose power tools to rain or wet 

conditions.

Water entering a power tool will 

increase the risk of electric shock.

d)   do not abuse the cord. never use the cord for 

carrying, pulling or unplugging the power tool. 

keep cord away from heat, oil, sharp edges 

or moving parts.

damaged or entangled cords 

increase the risk of electric shock.

e)   when operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of 

a cord suitable for outdoor use reduces the risk of 
electric shock.

f)   If operating a power tool in a damp location 

is unavoidable, use a residual current device 

(RCd) protected supply. 

Use of an RCd reduces 

the risk of electric shock. 

3.   PeRSOnal SafeTy

a)   Stay alert, watch what you are doing and use 

common sense when operating a power tool. do 

not use a power tool while you are tired or under 

the influence of drugs, alcohol or medication.

 A 

moment of inattention while operating power tools 
may result in serious personal injury.