120W Car Polisher
eN
7
MaiNTeNaNCe
WaRNiNg: Remove the plug from the socket
before carrying out any adjustment, servicing
or maintenance.
Your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
TRoubleShooTiNg
1. If your power tool does not start, check the plug on
the power supply first.
2. If the polisher does not abrade surface, chec the
bonnet. If the bonnet have been worn, replace the new
bonnet and try again.
3. If a fault can not be rectified, return the tool to an
qualified person for repair.
Staple your purchase receipt here
before returning this product for
warranty or any other reason, please call.
PoSiTeC auSTRalia PTy liMiTed
abN 14 101 682 357
unit 15, 23 Narabang Way belrose 2085 NSW australia
fRee Call 1300 889 028
EMAIL:office.sales@positec.com.au
