To order parts and supplies: 800.343.9353 >> eastwood.com
3
READ INSTRUCTIONS
• Thoroughly read and understand these product instructions before using
this equipment. Failure to follow all warnings can result in tool damage
or serious physical injury.
• Keep these product instructions for future reference.
FIRE AND EXPLOSION HAZARD!
• Do Not use near sparks, open flame or other potential ignition source.
Solvents and paints are highly combustible and may ignite or explode.
Keep at least 25’ away from any non-explosion proof compressors,
motors, switches etc.
HEALTH HAZARD!
• Avoid breathing vapors produced by Spray Gun. Always wear appropriate
NIOSH approved breathing apparatus and use in a well ventilated area.
• Wear appropriate ANSI standard Z87.1 eye protection.
• Wear solvent-resistant gloves.
• Do not allow unprotected persons or pets in the spray area.
BURSTING HAZARD!
• Do not exceed 60 psi (4.1 bar) of tool inlet pressure. Permanent tool
damage and/or bursting could occur and cause personal injury.
INJURY HAZARD!
• This Paint Gun can quickly spray when handling while connected to an air
supply causing serious personal injury. Always disconnect the Paint Gun
from the air supply before adding paint, changing nozzles, removing clogs
or other maintenance.
• Use only Eastwood Aerosol Injected Cleaner, acetone or lacquer thinner to
clean guns. Use of chlorinated or halogenated hydrocarbon solvents can
corrode aluminum gun components or emit hazardous reactive gasses.
• Use for spraying paint products only. Do not use for spraying pesticides,
fertilizer, acids or other corrosive materials and solvents.
SAFETY INFORMATION
