Cable routing how to
3.
Starting from the rear of the bike, begin feeding the housing
into the cable opening on the drive side chain stay. Push the
housing forward, twisting it as you do, until it comes out at the
forward end of the chain stay
REPLACING/INSTALLING REAR DERAILLEUR CABLE HOUSING
4.
Guide the housing into the housing port above the bottom
bracket. Make sure you insert the derailleur housing into the
port labeled “Shift.”
1.
Remove non-drive side head tube port cover.
2.
If replacing the old housing, cut a new piece to the same
length. If you do not have the old piece, approximate the length
required and cut a slightly longer portion.
5.
Push the cable from the rear until it comes out at the head
tube port.
6.
Once the housing is installed, re-install the headtube port.
Element Carbon Platform Manual
12
