Element Carbon Platform Manual
Pro tips & tricks & Exploded view
PRO TIPS & TRICKS
Please refer to the table for torque values and assembly details.
These views are provided to explain how your frame is assembled.
EXPLODED VIEW
ROCKSHOX REVERB TOOL
• When tuning your suspension, write down your settings
so you can refer back to them. Better yet, use an online
spreadsheet on your phone!
• Use a 4 mm plastic housing ferrule to plug any unused
cable ports at the head tube.
• When removing your rear wheel, you can rest the chain on
the driveside seatstay protector to prevent it from dangling
awkwardly.
• When replacing shift or post housing, you can use
a RockShox reverb tool to simply pull a new piece of
housing right into place, without disturbing the inner
foam tubes.
• When assembling pivot bolts, use grease to “stick” any
spacers into place while you assemble.
• Insert pivots through bearings/spacers so they sit flush
with the inside of the inner race, holding washers in
place while you assemble.
• Zip-tie a spare derailleur hanger to your saddle rails so you
always have one with you when you’re deep in the woods.
EXPLODED VIEW & FULL LIST OF PARTS
Click
HERE
to visit the Exploded View & the complete list of parts for the Element Carbon frameset.
SMALL PARTS KITS
Click
HERE
to visit the complete list of parts including part numbers, descriptions, and assembly instructions
16
