72808
30
▪
Operation with a DCC Command Station (Z21® system /
multiMAUS)
As the MULTIMAUS
®
has 20 function keys and a light button, can be especially comfortably operated.
Programming modes:
The locomotive and carriages react to all DCC programming modes.
We recommend:
direct CV programming (byte by byte) or POM mode (programming on main track).
The programming is described in the MULTIMAUS
®
manual.
Reading CVs:
With the appropriate equipment (e.g. / Z21
®
/ z21
®
/ z21
®
start), you can read the value byte by byte and bit by bit.
▪
More Functions
You can find out about a range of other possible set-tings, which are probably very rarely needed, relating to drive speed curve, load control
setting or noise synchronization from the detailed handbook. This can be downloaded as a pdf document MX645P22 from www.zimo.at.
72808.indd 30
28.06.2019 08:42:34