Connecting the Drive
ROCSTOR
|
ROCPORT ID3
quick installation guide
Page \ 3
1.
Turn ON your computer and wait until it fully boots up to load all programs
2.
When using USB, connect two ends of the USB “Y” cable to the USB ports of your computer (or via Power Hub
that is connected to your computer) and then the other end to the USB port in the Rocport. Upon connection, a Blue
light on the Rocport drive will turn ON.
3.
The Hard drive is preformatted for Plug-and-Play operation. After a few seconds a Rocstor HD icon will show on
“My Computer” folder under the Windows OS. Under the Mac OS, the Rocstor HD icon will appear on the “Desktop.”
4.
Click (double click) on the Rocstor HD icon to access the drive.
*You may also refer to the Rocstor website to view or download a full version of the Rocport ID3 manual. www.ROCSTOR.com
USB
USB 2.0
