E10356-110615
MB-3TL
Page 7
3.3 ALTERNATIVE INSTALLATION
If you have downloaded the setup file or if autorun is disabled on your computer, run the
resource CD as explained below.
1. Start your browser.
2. Choose File Open and navigate to your CR-ROM drive.
3. Click on "Start CD", and then follow the instructions above.
4. Click the Start button.
3.4 TESTING COMMUNICATIONS
Roctest MB-3TL Manager program communicates with the MB-3TL through a serial
connection. The steps below tell how to check the connection.
3.4.1 CONNECT THE DATA RECORDER TO YOUR PC
1. Find the serial port on your PC. It will have a 9-pin or a 25-pin connector.
Desktop PCs typically have two or more serial ports. Laptops typically have one.
2. Connect the interface cable (supplied) to the serial port. The interface cable is a
"modem cable" that is available at any computer supply store. An USB-RS232
adaptor is also supplied with the accessory kit for connecting directly to the USB
port.
3. Connect the other end of the interface cable to the serial port on the front panel
of the MB-3TL.
4. Switch on the recorder.
3.4.2 START THE PROGRAM
1. Click the Start button. Choose Programs from the Start menu.
2. Click on Roctest MB-3TL.
3. Roctest MB-3TL Manager program appears.
4. Click on the Edit Settings button.
