E10356-110615
MB-3TL
Page 9
4.2 RECORDER ID
Recorder ID: Enter an identifier for the recorder. This ID does not appear in the data file.
When memory is full: You can record more than 2,000 readings before memory is full,
so this parameter is not critical.
When "Stop recording" is selected, the recorder will store readings until its memory is full
and will then stop and wait for you to retrieve the readings. No readings are overwritten.
When "Continue recording" is selected, the recorder will store readings normally until
memory is full. Then it will continue to record new readings, overwriting the earliest
reading.
