5
Safety Precautions
Careful Transport
During the process of transportation, storage and installation, it is necessary
to prevent damage to the product caused by heavy pressure, severe
vibration and immersion.
Careful Installation
This product should be placed on the smooth desktop. The shell of the
product is an organic material and is strictly prohibited from contact with any
liquid, gas or solid material that may cause corrosion to the shell.
Do not Unauthorized Disassemble
This product has no parts which can be repaired by the user. The damage
caused by the user's own disassembly is not covered by warranty.
Electromagnetic fields at specific frequencies may affect image of machine.
6
Product Specification
Camera
Sensor
1/2.5'', CMOS, Effective Pixel: 8.29M
Scanning Mode
Progressive
Lens Mount
M12
Lens 1 (optional)
Lens Focus: f=3.5mm, Wide Angle: 84°
(Support Auto Focus)
Lens 2 (optional)
Lens Focus: f=2.8mm, Wide Angle: 120°
Minimal Illumination
0.5 Lux @ (F1.8, AGC ON)
Shutter 1/30s
~
1/10000s
White Balance
Auto, Indoor, Outdoor, One Push, Manual,
VAR
Digital Noise Reduction
2D, 3D Digital Noise Reduction
Backlight Compensation
Support
USB Features
Operate System
Windows 7/8/10, Linux, Mac OS
Color/Compression
YUY2/MJPG/H.264
USB Protocol
UVC 1.1
UVC PTZ
Support EPTZ
Input/Output Interface
USB Interface
1 x USB 3.0: Type B, female
Physical Parameter
Input Voltage
5V (USB Power Supply)
Current Consumption
0.6A
Operating Temperature
-10°C ~ 40°C
Storage Temperature
-40°C ~ 60°C
Power Consumption
3W
Size
194mm x 34mm x 42mm (without bracket)
Net Weight
0.34 Kg
7
Troubleshooting
Image
Image have jitter when the camera lens at max multiple
1) Check whether the camera installed position be stabled.
2) Check whether have vibrating machinery or object near the camera.
Control
Remote control cannot control the camera
1) Check and replace the new battery for the remote control.
2) Check whether the camera working mode is correct.
3) Check whether the address of remote control can match the camera.
8
Toxic and Harmful Substances
Part Name
Toxic or harmful substances or elements
(Pb)
(Hg)
(Cd) (CrVI) (PBB) (PBDE)
Metal x
Ο
Ο
Ο
Ο
Ο
Plastic
Ο
Ο
Ο
Ο
Ο
Ο
Glass x
Ο
Ο
Ο
Ο
Ο
Circuit board
x
Ο
Ο
Ο
Ο
Ο
Power x
Ο
Ο
Ο
Ο
Ο
Attached x
Ο
Ο
Ο
Ο
Ο
This form is compiled in accordance with SJ/T 11364.
Ο
: Indicates that the content of the hazardous substance in all
homogenized materials of the component is subject to the limit specified
in GB/T 26572.
x: Said the hazardous substance in at least one of the components
homogenized material content in excess of the GB/T 26572 limit
requirements, and there are no mature alternatives.
9
Warranty Card
If failure caused by non-human causes occurs within one year from the date
of purchase of the machine, you may enjoy the warranty service of the
product. Any of the following circumstances is not covered by the warranty:
Without disassemble, modification such as fault causes.
Use of an environment does not conform to requirements of the product.
Irresistible factors, such as fire, earthquake, lightning strike, etc.
Warranty card does not match the product number or it is altered.
User Name
User Address/Post Code
Contact Number
Product Model
Product Series
Purchasing Date
Invoice No.
Sales Department
User save, lost or not compensated
Sales Department: (seal)
079.79.1100841_V1.0
