■
3-16
3.4 Analysis
3.4.1 Auto Analysis
Auto Analysis is to calculate values such as CD (cell density) by automatically extracting
outlines of cells on the captured image
■
Check that the outlines of cells are correctly detected on the captured image.
The outlines cannot be extracted on some images.
■
Perform any of the following operations if outlines are not extracted correctly.
-
Retake
Capture an image again if the images are not clear.
-
Correcting trace line
Correct and redraw the incorrect images.
Refer to “3.4.1 b) Editing outlines” for how to edit the outlines.
-
Selecting cells
Exclude cells with outlines extracted incorrectly from the target of analysis.
Refer to “3.4.1 c) Selecting cells” for how to select cells.
-
Changing analysis method
Perform analysis with the L-count method or Core method. Refer to “3.4.2 L-
count method” and “3.4.3 Core method” for the operation of the L-count
method and Core method.
a) How to view analysis data
● R/L eye
capture screen
When touching the “Analyze” button on the capture screen or image selection
screen, the captured image is analyzed automatically and the R/L eye
analysis screen (Fig. 1) appears. In Quick mode, the image selection screen
appears when images of both eyes have been captured.
(Fig. 1)
(1)
Summary of Contents for REM 4000
