8
9
EN
EN
RSL 4500digital and RSL 5000digital by RODENSTOCK
RSL 4500digital and RSL 5000digital by RODENSTOCK
2. Fit the background illumination fi bre optic cable, The short end to the top of the lamp
housing, the long end to the fi bre optic swing arm adjacent to the mirror.
3. If CE compliant or FDA cleared imaging software has been installed, connect the PC USB
cable to the PC.
4.2 RODENSTOCK RSL 4500 SLIT LAMP
1. No fi tting of the background light is required as the Slit Lamp comes fully assembled.
5. CONTROLS
5.1 BACKGROUND ILLUMINATION ADJUSTMENT
long end
short end
RSL 5000 SLIT LAMP
RSL 4500 SLIT LAMP
6. Connect the shorter USB cable ((3020-P-7028) to the socket on the underside of the
DCA and to the appropriate socket on the USB hub located on the Slit Lamp base.
Ensure that there is plenty of slack at the USB hub end to allow Slit Arm rotation.
7. Route the cable in the groove in the Slit Lamp arm and replace the cover plate.
8. Connect the longer USB cable for connection to the PC to the hub and replace the USB
hub cover plate, this secures the cables.
4.1 RODENSTOCK RSL 5000 SLIT LAMP
1. Clip the auxiliary diffuser
and blue fi lter in place on
the Slit Lamp tower upright
posts, above the level of the
mirror. Align the slot to the
fl attened post section.
to camera
to PC
