14
RODIA
®
350 RS SERIES
GB
5) Battery tool use and care
a)
Recharge only with the charger
specified by the manufacturer.
A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack .
b)
Use power tools only with specifically
designated battery packs.
Use of any
other battery packs may create a risk
of injury and fire .
c)
When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another.
Shorting the battery
terminals together may cause burns or
a fire .
d)
Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns .
6) Service
a)
Have your power tool serviced by a
qualified repair person using only
identical replacement parts.
This will
ensure that the safety of the power tool
is maintained .
SPECIAL TOOLS SAFETY
WARNINGS
Working safely with this machine
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained therein are
strictly followed. Before using for
the first time, ask for a practical
demonstration.
Before working on the machine
itself, pull the mains plug.
Wear ear protectors and safety
glasses..
1 . The sawing machine is only to be used
formsawing tiles, marble and ceramics .
2 . Only saw blades advised by the
manufacturer should be used .
3 . Check the following before you start
sawing:
• the machine should be positioned on a
stable, flat and horizontal base,
• the saw blade must be correctly
mounted, (direction of rotation and
centred correctly)
• the condition of the saw blade,
• correct fixing of the saw cover,
• sufficient supply of clean cooling
water .
4 . During sawing the material to be cut
should not be tilted or moved .
5 . During sawing with this sawing
machine the max . sound pressure level
is exceeded . Because the max . sound
pressure level is exceeded during
operation wearing hearing protection is
mandatory .
6 . The safety label on the machine should
never be removed .
7 . In addition to the above mentioned
safety regulations the user should pay
attention to the following items:
• Read the instructions for setting up and
using the machine carefully .
• Check that the power cord is correctly
connected to the power supply .
• Electrical cables may not come in con-
tact with water or spray water .
• Damaged saw blades should be
replaced immediately .
