RODIA
®
SAFETY
It is extremely important that you read and under-
stand all of the safety instructions, the operating
instructions and the maintenance instructions. If
these instructions are not followed, serious injuries
and/or death could occur to you or to others.
Also, failure to read and follow the enclosed main-
tenance instructions can lead to equipment failure,
damage to the equipment or reduced lifetime of
the equipment.
SAFETY MESSAGES:
Safety messages are used to inform the person(s)
using this equipment of the potential hazards that
could lead to equipment damage, serious injury
or even death. The safety messages within this
manual will be followed by one of the following
(3) three words that identify the severity of the
damage.
It is important that all instructions within this manual
be followed. If the instructions are not followed
it is possible that serious injuries could occur as
well as death.
It is important that all instructions within this manual
be followed. If the instructions are not followed
it is possible that serious injuries could occur as
well as death.
It is important that all instructions within this manual
be followed. If the instructions are not followed
it is possible that serious injuries could occur as
well as death.
DAMAGE PREVENTION AND
INFORMATION MESSAGES:
A Damage Prevention Message is to inform the
user of important information and/or instructions
that could lead to equipment or other property
damage if not followed. Information Messages
convey information that pertains to the equipment
being used.
Each message will be preceded by the word
NOTE, as in the example below.
NOTE:
Equipment and/or property damage may result if
these instructions are not followed.
GENERAL SAFETY PRECAUTIONS
AND HAZARD SYMBOLS:
In order to prevent injury, the following safety pre-
cautions and symbols should be followed
at all times!
Safety Precautions:
●
MACHINE GUARDS SHOULD BE
IN PLACE AT ALL TIMES
It is important that all machine
guards remain in place and in
proper working condition. This
is to prevent serious injury,
death or damage to the
equipment.
●
REMOVE ADJUSTING TOOLS.
The machine is supplied with some adjusting
tools for equipment maintenance. It is important
that the user of the machine makes sure that all
tools are removed or in their proper storage area
before the machine is turned on.
PAGE 4
RODIA 3515RS OPERATING MANUAL V11/2006R1
