Note:
In case of any doubt or if you have questions concerning the maintenance of your bike, turn to your authorised Rog repair service or other expert repair service.
5
Maintaining the closing mechanism
To enable simple assembly and disassembly of your bike, it is
important to maintain a clean and well-lubricated closing mecha-
nism. If the folding mechanism becomes rigid and less flexible, it
must be opened, cleaned, and a silicone lubricant must be injected in
the slots of the folding mechanism. After injecting the lubricant,
bend the folding mechanism multiple times to allow the lubricant to
apply to the closing mechanism well. If the folding mechanism still
remains less flexible, visit an authorised Rog repair service or other
expert repair service provider that will properly disassemble the
folding mechanism, thoroughly clean it, and lubricate it.
6
Keep in a dry place
Avoid leaving your bicycle in the rain. Keep it in a dry place. Also, do
not expose your bicycle to corrosive substances. Keep your bicycle in
a dry place and do not expose it to rain and corrosive substances.
8
Damage to the colour coating
If the colour coating on the bike frame is damaged, use a corrective
lacquer to properly coat it, protecting it from any further rusting of
the damaged areas.
The routine cleaning and lubrication of the chain will prolong its
service life. In order to properly maintain the chain, first degrease it
using a degreaser, then dry it, and finally apply chain lubricant.
9
Chain maintenance
7
Reflectors and lights
Regularly check the reflectors, lights, and their carriers, and make
sure to keep them clean, undamaged, and safely installed.
Routinely clean and lubricate all movable parts of the bike. All bike
components should be properly screwed and set up.
10
Maintenance of all movable parts
ROG Bikes
Manual for the Use of the Pony Folding Bike
Page 12
