DE
113
Auswahl der Funktionsweise der Warnleuchten am Schlagbaum
HINWEIS
: Um den Stromverbrauch im Akkubetrieb zu senken, stellt das Steuergerät automatisch den Wert
ein.
Deaktiviert. Leuchten immer aus.
Leuchten immer an.
Leuchten an, wenn die Schranke still steht, Leuchten blinken, wenn sich die Schranke bewegt.
Leuchten kurz eingeschaltet, wenn die Schranke stillsteht, Leuchten blinken, wenn sich die Schranke bewegt.
Leuchten kurz eingeschaltet, wenn die Schranke geschlossen ist, Leuchten blinken, wenn sich die Schranke
bewegt und sind aus, wenn die Schranke geöffnet ist.
Konfiguration Kontakt Uhr.
Wenn man die Funktion Uhr aktiviert, öffnet sich die Schranke und bleibt geöffnet.
Nach Ablauf der vom externen Gerät (Uhr) programmierten Zeit die Schranke schließt sich.
Wenn man die Funktion Uhr aktiviert, öffnet sich die Schranke und bleibt geöffnet. Alle Befehle werden ignoriert.
Wenn man die Funktion Uhr aktiviert, öffnet sich die Schranke und bleibt geöffnet. Alle Befehle werden ange-
nommen. Wenn die Schranke wieder ganz geöffnet ist, wird die Funktion Uhr wieder aktiviert.
Aktivierung der garantierten Schließung
Die Aktivierung dieses Parameters stellt sicher, dass die Schranke nicht offen bleibt aufgrund fehlerhafte Befehle.
Die Funktion wird NICHT aktiviert wenn:
• die Schranke einen STOPP-Befehl erhält,
• die Sicherheitsleiste anspricht,
• die vom Parameter
$
eingestellten Versuche beendet sind.
Deaktiviert. Der Parameter
wird nicht angezeigt.
Aktiviert.
Wenn die Schranke infolge eines Befehls für den Schrittbetrieb stehen bleibt, aktiviert das Steuergerät nach einer vom
Parameter
eingestellten Zeit ein Vorblinken von 5 s (unabhängig vom Parameter
$
) und die Schranke schließt sich.
Einstellung Aktivierungszeit der garantierten Schließung
HINWEIS:
Der Parameter wird nicht angezeigt, wenn der Parameter
=
ist.
von 2 bis 90 s Wartezeit
von 2 bis 9 Min. Wartezeit
Auswahl der Zugangsart zu den Parkplätzen
HINWEIS
: Wenn die Lichtschranke durch die Werte
,
oder
aktiviert wird, verursacht sie während
der Schließbewegung immer das erneute Öffnen, es sei denn der Parameter
steht auf
. Die Parame-
ter
$
,
$
,
,
,
,
werden nicht angezeigt.
Bei
=
,
,
schließt die Schranke nach der in Parameter
eingestellten Pausenzeit (wenn
auf einen anderen Wert eingestellt ist als
).
Für weitere Informationen wird auf Kapitel 14 "Anwendungsbeispiele für Zugangsarten zu den
Parkplätzen" verwiesen.
Deaktiviert. Der Parameter
wird nicht angezeigt.
Betrieb in beide Richtungen mit sofortiger Wiederschließung.
Bei der Einfahrt in und der Ausfahrt aus dem Parkplatz öffnet die Schranke durch den Befehl
AP
.
Wenn das Fahrzeug den Kontakt FT (Öffner) überquert und wieder freigegeben hat (zum Beispiel mit Hilfe
eines Schleifenauswerters), schließt sich die Schranke sofort wieder.
Mit Parameter
=
öffnet die Schranke und bleibt geöffnet, bis das Fahrzeug durchgefahren ist.Wenn das
Fahrzeug zurückfährt bleibt die Schranke geöffnet.
HINWEIS:
Es ist möglich, weitere 5 Sekunden vor der Schließung zu hinzuzufügen. Regulieren Sie
$
.
Betriebsart Richtung 1. Bei der Einfahrt öffnet die Schranke durch den Öffnungsbefehl
AP
. Wenn das Fahrzeug
die Kontakte
FT
(Öffner) und
PED
(Schließer) überquert und wieder freigegeben hat, schließt sich die Schranke
wieder. Bei der Ausfahrt aus dem Parkplatz öffnet die Schranke durch den Befehl
PED
, der vom Schleifenaus-
werter erteilt wird. Wenn das Fahrzeug den Kontakt
FT
(Öffner) überquert und wieder freigegeben hat, schließt
sich die Schranke wieder.
Mit Parameter
=
öffnet die Schranke und bleibt geöffnet, bis das Fahrzeug durchgefahren ist.Wenn das
Fahrzeug zurückfährt bleibt die Schranke geöffnet.
HINWEIS:
Es ist möglich, weitere 5 Sekunden vor der Schließung zu hinzuzufügen. Regulieren Sie
$
.
Betriebsart Richtung 2. Bei der Einfahrt öffnet die Schranke durch den Öffnungsbefehl
AP
, nach der über den
Parameter
eingestellten Zeit für die automatische Schließung schließt sich die Schranke wieder.
HINWEIS
: Um die automatische Schließung zu erhalten, den Parameter
auf einen anderen Wert als
einzustellen.
Bei der Ausfahrt aus dem Parkplatz öffnet die Schranke durch den Befehl
PED
, der vom Schleifenauswerter erteilt wird.
Wenn das Fahrzeug den Kontakt
FT
(Öffner) überquert und wieder freigegeben hat, schließt sich die Schranke wieder.
HINWEIS:
Es ist möglich, weitere 5 Sekunden vor der Schließung zu hinzuzufügen. Regulieren Sie
$
.
Summary of Contents for CTRL
