2) Key in
5555*B
(This enters your user entry code, and opens the gates
pedestrian function)
Learning Procedure - Roger control box or standalone receiver.
(The keypad learns in the same way that your learn the gate remotes, refer to
the control box instructions)
1) Press
P1
on the radio card the led will flash slowly.
1) Then key in
5555*A
(This enters your user entry code 5555*A into the
receiver channel 1)
1) Press
P2
on the radio card the led will flash slowly.
1) Then key in
5555*B
(This enters your user entry code 5555*B into the
receiver channel 2)
Troubleshooting
If the unit does not learn to the receiver, try speeding up the process as the
receiver may have timed out. Or when entering the code 5555*A or B hold the
second A or B for longer (This is the same as holding your remote button
longer).
Deleting a user code.
(Example – user code 5555)
1) Key in
##5555*
(This enters the user code 5555 that you wish to delete)
2) If the code exists the red led flashes and stays lit.
3) Key in
5555*
(The user code 5555 is deleted, the green led lights and the unit
buzzes for two seconds
