Page
10
of
21
IP address=192.168.0.80
Subnet mask=255.255.255.0
Default gateway=192.168.0.1
Administrator login: admin
Administrator password: admin
UDP port = 3544
Events recorded in internal flash memory
Encrypted communication with default password
It is assumed that mentioned above parameters will be changed in particular access control
installation, specifically IP address and administrator password. These parameters can be modified
by means of CPR32-NET webpage (see fig 5) opened with web browser e.g. Internet Explorer.
Note: In order to connect with CPR32-NET in local area network (LAN), the computer must be in
the same subnet. In case of CPR32-NET with default IP address, the IP address of computer should
be 192.168.0.xxx.
Fig. 5 CPR32-NET webpage started by means of web browser
In fig. 5 following configuration options are available:
Network
In this window following parameters of CPR32-NET can be modified
·
IP address
·
subnet mask
·
UDP port
·
and other communication parameters
Passwords
In this window, administrator password as well as communication password for encrypted
communication between CPR32-NET and computer with PR Master software can be modified. More
information on encryption is given in paragraph 4.4.1 Encrypted communication.
