MCT88M-IO Operating Manual.doc
2019-03-06
15/20
controller. Range: [0]: No, [1]: Yes. Default value: [0]: Yes.
PIN followed by [#] key
Parameter enables use of PINs with variable length. In such scenario
PIN is concluded with [#] key. Range: [0]: No, [1]: Yes. Default value:
[0]: Yes.
Min. length of PIN
Parameter defines the minimal number of digits for PIN entered with
keypad. If the number of entered digits is lower than this parameter
then it cannot be sent to controller when concluded with [#] key. When
set to 0 then PINs are disabled. Range: 4-8. Default value: 4.
Max. length of PIN
Parameter defines the maximal number of digits for PIN entered with
keypad. If the number of entered digits reaches this parameter then
PIN is automatically sent to controller and [#] key pressing is not
necessary. When set to 0 then automatic PIN transmission is disabled.
Range: 0-8. Default value: 8.
[*] key press allowed before PIN
The parameter enables use of [*] key before PIN is entered. The key
can be used for additional functionalities. Range: [0]: No, [1]: Yes.
Default value: [0]: No.
[*], [#], [F1], [F2], [F3], [F4] key
press options
Parameter defines key press type for [*], [#], [F1], [F2], [F3], [F4] keys.
Range: [1]: Short press only, [2]: Long press only, [3]: Short and long
press. Default value: [1]: Short press only.
Advanced settings
Card/PIN buffer timeout [s]
Parameter defines time for card/PIN storing in device buffer. When the
time elapses the buffer is cleared even if card/PIN is not transmitted to
controller. Range: 1-64. Default value: 10.
AF type
Parameter defines authentication factor type returned by terminal.
Default value: [0010]: Number 40bits
Long card read time [s]
Parameter defines long card read time. When set to 0 then long read
is disabled. Range: 0-64. Default value: 0
Long key press time [s]
Parameter defines long press time for [*], [#], [F1], [F2], [F3], [F4] keys.
When set to 0 then long press is disabled. Range: 0-64. Default value:
2.
BLE session timeout [s]
Parameter defines maximal time for establishing connection between
mobile device and terminal in Bluetooth technology. When timeout
elapses the session is interrupted by terminal so mobile device could
attempt to establish connection again. When set to 0 then timeout is
disabled. Range: 0-10. Default value: 3.
BLE broadcasting power [dBm]
Parameter defines power of broadcasting radio signal for Bluetooth
communication. Range: [1]: -18, [2]: -12, [3]: -6, [4]: -3, [5]: -2, [6]: -1,
[7]: 0. Default value: [1]: -18.
BLE transmission power [dBm]
Parameter defines power of transmission radio signal for Bluetooth
communication. Range: [0]: Auto; [1]: -18, [2]: -12, [3]: -6, [4]: -3, [5]: -
2, [6]: -1, [7]: 0. Default value: [0]: Auto.
Input types
IN1, IN2, IN3
Parameter defines input type. Range: [1]: NO, [2]: NC, [3]: EOL/NO,
[4]: EOL/NC, [5]: 2EOL/NO, [6]: 2EOL/NC, [7]: 3EOL/NO, [8]:
3EOL/NC, [9]: 3EOL/DW/NO, [10]: 3EOL/DW/NC. Default value: [1]:
NO.
Input response times
IN1, IN2, IN3 [ms]
Parameter defines minimal duration of pulse which is required to
trigger the input. Range: 50-5000. Default value: 50.
Parametric (EOL) input resistances
