MCX4D Operating Manual.doc
2018-07-20
13/15
Fig. 10 MCX4D board
Battery charging settings
300 mA current recommended for 12V/7Ah battery
600 mA current recommended for 12V/17Ah battery
900 mA current recommended for 12V/24Ah battery
LED signalling
In
Normal mode
the LED signals lack of external power supply. In case of
Memory
reset
the LED is used for manual addressing.
Single pulse every 4 sec. :
Normal mode
Quick pulsing:
Service mode
Slow pulsing (0.5s/0.5s): No communication with controller
Very slow pulsing (1s/1s): Configuration memory error
Data transmission to controller
Data receiving from controller
MCX4D terminals
Terminal
Function
BAT+
Battery positive pole
BAT-
Battery negative pole
VOUT+
13.8VDC/0.2A output power positive pole
