background image

PS15v24-BRD v3.2 EN Rev.A.doc 

 

2008-04-08 

  

Battery fuse is off 

Battery is not connected 

Battery has high resistance which indicates that battery is damaged 

 
When PSAM-1 operates in networked mode it must be connected to PRxx2 series access 

controller. In this mode PSAM-1 module transmits all warnings direct to the access 
controller.  

I

NSTALLATION

 

PS15v24-BRD should be installed on the flat surface using 4 nylon distances (delivered 
with the unit), far enough from heat and moisture sources.  All electrical connection 

should be carried out without supply. PS15v24-BRD will not start operation on reserve 
battery, to start operation it requires AC supply.  

 

Warning 

Do not adjust potentiometers located on PS15v24-BRD electronic board, these 

components are factory set and should not be changed. 

 

T

ECHNICAL 

S

PECIFICATION

 

Parameter Value 

Comments 

AC supply 

34-38 VAC 

Alternatively, PS15v24-BRD might be 

supplied from  48VDC 

AC frequency 

50..60 Hz 

 

Power 50W 

Full 

load 

Nominal 
Output voltage 

13.8 VDC 

Output voltage may vary from app. 23.0  
up to 27.6V depending on actual battery 

charging phase. 

Max. output current 
(without battery) 

1.5A 

Maximum output current is  guaranteed for 

unlimited time and for entire temp. range. 
During battery charging process output 

current will be reduced to 1.2A 

Ambient temperature   

5-40 °C 

 

Max. momentary 
output current with 
battery 

6A 

2.0A delivered by electronic circuit and 

4.0A delivered by battery 

Initial battery charging 
current 

 

0.3A 

 

 

Battery cut off voltage 

20.0V 

 

Battery compartment 

2 x 6.5Ah/12V 

or 7Ah/12V 

Dimensions 100x70x45 

 

Weight ~95g 

Without 

battery 

 

 

 

The symbol of a crossed-through waste bin on wheels means that the product 

must be disposed of at a separate collection point. This also applies to the 
product and all accessories marked with this symbol. Products labeled as such 

must not be disposed of with normal household waste, but should be taken to a 

collection point for recycling electrical and electronic equipment. Recycling helps to 

reduce the consumption of raw materials, thus protecting the environment. 

Reviews: