RWL-1 Operating Manual.doc
2020-03-25
8/18
11
2,405
19
2,445
12
2,410
20
2,450
13
2,415
21
2,455
14
2,420
22
2,460
15
2,425
23
2,465
16
2,430
24
2,470
17
2,435
25
2,475
18
2,440
26
2,480
Access granting in Emergency mode
Emergency mode enables functioning of access control with wireless locks in case of temporary
interferences in radio communication or access control system failure. The access is based on settings
saved in lock’s memory.
Dynamic user list
Dynamic user list is created on ongoing basis when the system is operated. Each card which was
granted access according to access controller logic is stored on dynamic list. Such card in Emergency
mode enables unconditional access granting. After the time specified by the parameter
Dynamic user
list timeout
the card is automatically removed from the list. Such feature is especially useful in case of
lost or inactive cards.
Offline mode user list
In Emergency mode, lock additionally applies
Offline mode
user list and can grant the access
according to the description given in section Offline mode. The card can be granted access if it is
stored on any of two mentioned user lists.
LED indicators
RWL-1 lock is equipped with 4 LED indicators which functions are described in the table below.
LED indicators
Name
Colour
Description
LED RED
Red
Online mode
: the function of this LED is programmed in VISO
management software.
Offline mode
: indicator is blinking when lock waits for the
optional second card reading. If it occurs, lock switches to
Office
mode
.
LED GREEN Green
In
Online mode
the function of this LED is programmed in VISO
management software.
In
Offline mode
the indicator is not used.
LED BLUE
Blue
Online mode
: the indicator is controlled by access controller in
accordance with the logic applied in the RACS 5 system.
If the lock switches to
Offline mode
due to communication
failure then LED BLUE is operated as lock was in
Offline mode
except that it blinks instead of steady light.
The indicator blinks slowly if wireless communication is not
configured.
In
Offline
mode
the indicator:
·
2 sec pulse when access is granted and external
handle is coupled
