1. Attach the Left Handle Rail (9) to the Left
Action Arm (5), secured with Allen Head
Bolt (28) and Carriage Bolt (23), same way
to assemble the Right Handle Rail (10) to
the Right Action Arm (6).
2. Connect the Computer Connector (42) to
Upper Computer Wire (32), then slide the
Computer (12) to the Front Post (4), secured
with Screw (45).
3.Attach the Handlebar (11) to the Front
Post (4), secured with Spring Washer (41)
and Allen Head Bolt (40), match the Clip
Ring Cover (33), after then plug the Hand
Pulse Sensor Wire (36) to back hole of the
Computer (12).
Step 5
10
Step 6
Attach the Left Pedal (13) to the Left Pedal
Post (7), secured with screw (20), Same
way to attach the Right Pedal (14) to the
Right Pedal Post (8).
FUNCTION MARK:
1.
SCAN: Auto scan
2. SPEED: Speed
3. DIST: Trip distance
4. TIME: Riding time
5. ODO: Total distance
6. CAL: Calorie
7. Pulse
HOW TO INSTALL BATTERY:
1. Take out the battery on the back of monitor.
2. Place one of SIZE-AA or UM-4 battery into the battery housing.
3. Insure battery is correctly positioned and battery spring is in proper contact with
Battery.
4. Battery life is approx. 1 year under normal usage.
11
5. If the display is illegible or only partial segments appear, remove the battery and
wait 15 sec, before reinstalling.
6.
Removing the battery will erase computer memory.
