45
For devices connected to the DIGITAL AUDIO OUT socket, you can select from the following settings.
'All': Dolby Digital and DTS signals are fed unaltered to the digital output. MPEG-2 multi-channel signals are converted to PCM
(Pulse Code Modulation).
'PCM only': Dolby Digital and MPEG2 mulit-channel signals are converted to PCM (Pulse Code Modulation).
'Off': Digital output switch off.
For devices with analoge audio input.
For devices connected to the analogue audio output ( L/ R), you can select from the following settings.
'Stereo': For devices without Dolbysurround or Trusurround. Use this setting if the DVD recorder is only connected to a stereo TV set
'surround': Dolby Digital and MPEG-2 multi-channel are mixed down to a DOLBY surround-compatible two-channel output signal.
For devices with Dolby Surround Pro Logic decoder.
"Night mode" : Night mode optimises the sound for playback at low volume. You are therefore less likely to disturb your neighbours.
This only works for Dolby Digital audio on DVD video disc.
You can choose the following settings in this menu:
Playback audio language
Subtitle language
'Digital output'
'Analogue output'
Language settings
'Playback Audio'
'Subtitle'
"3D sound" : The six channels of the digital surround sound (Dolby Digital, MPEG-2) are mixed down to a two-speaker output signal.
All original audio information is retained. The result is an impression of being surrounded by several loudspeakers.
