Preparing for use
R&S
®
TSMA6
11
Getting Started 4900.8040.02 ─ 09
Accessories
The following items are included with shipment of the R&S TSMA6:
●
12 V DC power supply cable with a cigarette lighter connector
●
Wide range RF paddle antenna (700 MHz to 2600 MHz)
●
Active GPS patch antenna
●
LAN cable with ferrit
●
Ferrit for LAN cable supplied by the customer
Optional accessories
The following items are optionally available.
●
TSMA6-ZCB2 (Carrying Bag)
●
TSMA6-Z1 (AC Adapter)
●
TSMA6-Z2 (19" Rack Adapter)
●
TSMA6-Z5 (Carrying Box)
4.3
Connecting external devices
The SMA connector is sensitive to mechanical stress. Use the following
handling precautions. (Relevant for
●
Always use a torque wrench and mount the cable end with 60 Ncm.
●
Do not stack adapters directly at the SMA connector. If you need to use
adapters (e.g: SMA to N), then always use a specific adapter cable
(R&S no. 4900.1700.00).
To select the correct connectors, refer to
Chapter 5.2, "Rear panel view"
1. Connect the RF antenna to the RF IN connector (see
- 14).
2. Connect the GPS antenna to the GPS ANT port (see
3. Connect mouse and keyboard to the USB 2.0 ports (see
- 11) and
a monitor to the appropriate monitor port (HDMI, USB-C) (see
9) if you want to use local operation. (optional)
Connecting external devices
