background image

Configuring the R&S TSMA6

R&S

®

TSMA6

32

Getting Started 4900.8040.02 ─ 09

6

 

Configuring the R&S TSMA6

6.1

 

Accessing the R&S TSMA6

There are different ways to control measurements on the R&S TSMA6.

Local operation
To use the R&S TSMA6 as an ordinary PC, an external monitor, mouse and
keyboard have to be connected to the R&S TSMA6.

Remote access
The remote access to the R&S TSMA6 can be realized via the following
options.
– Using the web GUI of the R&S TSMA6 (see 

Chapter 6.1.1, "Using the

R&S TSMA6 web GUI"

on page 32).

– Establishing a remote desktop connection (via LAN/WLAN) (see 

Chap-

ter 6.1.2, "Using a remote desktop connection"

on page 33).

6.1.1

 

Using the R&S TSMA6 web GUI

The Microsoft EDGE

 browser replaces the former used Internet Explorer

for the TSMAx web-GUI and is used as default browser.

The R&S TSMA6 web GUI gives the user full access to control and measure with
the R&S TSMA6. Following tasks can be done:

Recalling of system information / hardware software versions / IP settings

Configuring measurement mode / power up/down behavior / band selection

Configuring LAN / WLAN & Bluetooth settings / IP configuration

File transfer (upload / download)

Showing and installing SW licenses

Updating firmware and software

Creating a user backup

Restarting device / scanner part

Accessing online help

Accessing the R&S TSMA6

Summary of Contents for 4900.8005.02























































Reviews: