Additional Basics on Remote Control
R&S
®
NGP800
178
User Manual 5601.5610.02 ─ 04
CONDition
●
The
CONDition
register queries the actual state of the instrument. If you want to
query the constant voltage or current mode, you have to use the
CONDition
regis-
ter.
The
CONDition
register delivers a "1" (first bit set) in constant current mode (CC) and
a "2" (second bit set) in constant voltage mode (CV).
If the correct channel is selected and the red LED of the channel button lights up (CC
mode), the query of the
CONDition
register must deliver a "1".
Example:
STAT:QUES:ISUM1:COND?
EVENt
●
The
EVENt
status register is set (1) until it is queried. After reading (query), the
EVENt
status register is set to zero.
The description of registers is only used for general explanation. Due to the complexity,
we recommend the general accessible SCPI standard document for more detailed
information.
For further description of the status register, see
Chapter 7.9, "Status Reporting Com-
Figure A-2: Structure of the status:QUEStionable:INSTrument register
Status Reporting System
www.allice.de
Allice Messtechnik GmbH
