Remote Control Commands
R&S
®
NGP800
96
User Manual 5601.5610.02 ─ 04
7
Remote Control Commands
This chapter provides the description of all remote commands available for the
R&S
NGP800 series. The commands are sorted according to the menu structure of the
instrument. A list of commands in alphabetical order is given in the "List of Commands"
at the end of this documentation.
For more information on
Messages and Command Structure
and
Structure of a SCPI Status Register
, see the "Annex" at the end of
this documentation.
7.1
Common Setting Commands
Common commands are described in the IEEE 488.2 (IEC 625-2) standard. These
commands have the same effect and are employed in the same way on different devi-
ces. The headers of these commands consist of "*" followed by three letters.
Many common commands are related to the Status Reporting System.
*CLS
Clear status
Sets the status byte (STB), the standard event register (ESR) and the
EVENt
part of
the
QUEStionable
and the
OPERation
registers to zero. The command does not
alter the mask and transition parts of the registers. It clears the output buffer.
Usage:
Setting only
*ESE
<Value>
Event status enable
Sets the event status enable register to the specified value. The query returns the con-
tents of the event status enable register in decimal form.
Common Setting Commands
www.allice.de
Allice Messtechnik GmbH
