SYSTEM Functions (SYS Key)
R&S AM300
E-1007.9922.12
6-190
Operating manual, 02/2005
6.3
SYSTEM Functions (SYS Key)
Introduction
The R&S AM300 has system and service functions as well as generator
functions.
All current settings can be called so that they can be viewed at a glance, and
saved for use at a later date, a selftest can be run on the R&S AM300 and the
system settings configured. Furthermore, the R&S AM300 switched over from
remote control to local mode.
Switching over the
user interface
When the R&S AM300 has been switched on and the selftest has run without
detecting any faults, the arbitrary and function generator’s user interface is
activated.
1.
Press the
SYS
key
The curve diagram and the parameter field are blanked out. The menus
for the system and service functions are brought up on the screen in the
menu area and the appropriate functions are assigned to the function
keys [13]. Depending on the function key assignment, the associated
parameters are listed as tables in the diagram area.
2.
Press the
SYS key
The
new
settings are saved and the arbitrary and function generator’s
user interface is activated again.
Press the
ESC/CANCEL key
The
old
settings are retained and the arbitrary and function generator’s
user interface is activated again.
Menus for
system and
service functions
Selects and calls the instrument‘s default setting
( 6-191)
Displays the current instrument settings
( 6-200)
Saves and loads user-defined settings
( 6-200)
System settings
( 6-204)
Service functions
( 6-214)
System information
( 6-215)
Summary of Contents for AM 300
Page 2: ...02 2005 ...
