Overview of all Menus and Functions (Shortcuts)
R&S AM300
E-1007.9922.12
7-236
Operating manual, 02/2005
7.6.4
Function
Note
Instrument functions are accurately described in chapter 6 of the R&S
AM300 manual.
Configurating the output signal CH1
Configurating the output signal CH2
Sweep settings
Trigger settings
Setting the depedence between the channels
7.6.4.1
CH1 (CH2)
Main function
display (always
visible)
Pull down menu
Set the frequency of the current waveform
( 2 )
Open submenu:
Set the amplitude of the current waveform, e.g.
Sine
Set signal amplitude as peak-to-peak value
( 6 )
Set signal amplitude as rms value
( 6 )
Set signal amplitude in dBm
( 6 )
Set DC component
( 4 )
Set upper limit for output voltage
Set lower limit for output voltage
Select waveform
( 7 )
Open submenu:
Set function parameters of the current waveform, e.g.
Sine
Set start phase
( 5 )
Switch on output channel 1
( 1 )
2
3
4
5
1
7
6
Summary of Contents for AM 300
Page 2: ...02 2005 ...
