Setting Parameters
R&S AM300
E-1007.9922.12
5-54
Operating manual, 02/2005
5.4.3 Selecting
Settings
Introduction
When you select a menu, a number of instrument functions are displayed in
the function area. If certain function keys are then pressed, a selection field is
displayed in the diagram area. You can then choose and activate any of the
settings offered for selection.
The function key you select is highlighted.
e.
g.:
Selecting a
waveform
( 6-72)
1.
Press the
function key
in the
menu.
A selection field containing the available settings is displayed. The
default setting is „Sine“.
2.
Select a waveform with
rotary knob
3.
Press the
ENTER key
[5] to close the selection field.
The new setting is saved and the waveform is displayed in the diagram
area with at least one period.
If you want to keep the old setting, close the entry field with the
ESC/CANCEL key
Note
If there are more than 12 options, a scroll bar is displayed on the right next to
the selection field. At any one time, only 12 options are displayed on the
screen.
Summary of Contents for AM 300
Page 2: ...02 2005 ...
