Arbitrary and Function Generator
R&S AM300
E-1007.9922.12
6-80
Operating manual, 02/2005
Setting the signal
amplitude as an
rms value V
rms
1.
In the
submenu
press the
function key
.
An entry field containing the current setting is displayed.
2.
Enter a new value ( 5-55).
The value range for the rms value V
rms
results from the conditions for the
peak-to-peak value V
pp
and the DC offset.
The rms value refers only to a waveform which is symmetrical about zero
and disregards DC offset.
Setting the signal
amplitude in dBm
1.
In the
submenu
press the
function key
.
An entry field containing the current setting is displayed.
2.
Enter a new value ( 5-55).
The value range for the power P[dBm] results from the conditions for the
peak-to-peak value V
pp
.
The rms value refers only to a waveform which is symmetrical about zero
and disregards DC offset.
Note
The signal amplitude can only be entered in dBm if a terminating resistance
of 50
Ω
has been selected ( 6-136).
Summary of Contents for AM 300
Page 2: ...02 2005 ...