SYSTEM Functions (SYS Key)
R&S AM300
E-1007.9922.12
6-214
Operating manual, 02/2005
6.3.5
Service Functions (SERVICE Menu)
What the settings
are for
You can call a number of auxiliary functions to be used for servicing or
troubleshooting from the SERVICE menu. These functions are not required
for normal signal generation with the R&S AM300.
Selecting the
SERVICE menu
1.
Press the
SYS
key
2.
Select the
menu
with the
3
or
4
cursor key
The menu name is highlighted and the appropriate functions are
assigned to the function keys [13].
Function key
assignment
Performs a selftest
( 6-214)
6.3.5.1 Performing
Selftests
Use
The R&S AM300 can perform a module selftest. If there is a fault, the R&S
AM300 itself is capable of localizing the defective module.
Starting
selftests
•
Press the
function key
in the
menu
.
The selftest starts. All modules are checked one after the other and the
result, “passed” or “failed”, is output.
Summary of Contents for AM 300
Page 2: ...02 2005 ...
