Trying Out the Instrument
R&S
®
HMP Series
29
Getting Started 1178.6791.02 ─ 02
The R&S
HMP immediately applies the setting and indicates the activated
fuse in the display.
After the fallback time has elapsed, the instrument exits the setting mode.
See Chapter "Instrument Functions > General Functions > Key Fallback Time"
in the user manual.
3. Repeat step 1 and step 2 to disable the fuse function.
Activating the output
You can turn on and off the output voltages regardless of the operating mode the
instrument is in.
1. Press the Ch1 key.
2. Press the Output key.
The Output key turns on the outputs of all activated channels and supplies the
connected loads.
Saving instrument settings
You can save up to 10 measurement configurations in the memory locations pro-
vided by the instrument.
1. Press the Store key.
The "Store Settings" dialog opens.
2. Use the rotary knob to select the memory location.
3. Confirm with the rotary knob.
4. Return with the Store key.
The R&S
HMP saves the settings. Previous settings are overwritten.
Recalling instrument settings
To retrieve a saved configuration:
1. Press the Recall key.
2. Use the rotary knob to select the memory location.
3. Press the rotary knob again to load the configuration.
4. To exit the "Recall Settings" dialog, press the Recall key.
