Instrument Functions
R&S
®
NGA100
56
User Manual 5601.8919.02 ─ 03
Table 6-3: EasyArb input field
EasyArb input field
Description
EasyArb mode
Enable or disable the EasyArb function.
If enabled, the EasyArb function is activated in Ch 1.
See
Data points
Set the number of data points in the EasyArb table.
Each data point contains the settings for "Voltage",
"Current" and "Duration".
Repetition
Set the number of times the waveform is output in
the EasyArb table. If this is set to "0", the waveform
is output continuously.
EasyArb table
Configures the EasyArb data table. Use the arrow
keys to navigate the "Voltage", "Current" and "Dura-
tion" settings.
Clear
Reset all the data points in the EasyArb table to
0.00 V, 1.000 A and 0.01 s for "Voltage", "Current"
and "Duration" respectively.
Apply
Select "Apply" to save EasyArb configuration.
6.11.2
EasyRamp
With EasyRamp, the R&S NGA100 provides you the operating condition to output a
constant rise of the supply voltage. The output voltage can be increased continuously
within a 10 ms to 10 s timeframe. See
Figure 6-13: Ramping voltage output
1. Select "EasyRamp" menu item.
The R&S NGA100 displays the "EasyRamp" dialog. See
Advanced Functions