Operation
Power Supply NGMO
4.00 / 07-2004
4-3
Function
element
Type
Function
key
5; MENU
Pressing the MENU key, allows you to select any of the 36 NGMO
available optional functions with the variation knob.
A menu need not necessarily have submenus.
key
6; OUTPUT; ON/OFF
The ON/OFF key is used to turn the output of the current from the
selected Power Supply (A, B or both) on or off.
key
7; Current setting
Press I-SET to set the output current limit of the channel you have
selected. The value you want can be entered and modified after you
press the SHIFT key or by turning the variation knob.
The max. settable value is 5 V at 5 A. On a higher value than 5 V the
max. current output is limited to max. 2.5 A.
key
8; Overcurrent protection
Pressing this key allows you to choose between the options “current
protection mode” or “current limit mode”. When the “current protection
mode” has been selected, the output is switched off when the max.
output current exceeds the set current limit.
key
9; RECALL
The RECALL key is used to recall all settings stored in memory
locations 1 to 9.
Memory location 0 contains the factory default settings which can not
be modified.
key
0; LOCAL
With the LOCAL key the unit operation can be switched from remote
control back to local control.
key
•
SHIFT
When the second function of the SHIFT key is selected, numerical
values and a decimal point can be entered. Cancel a selected function
by pressing the SHIFT key twice.
key
ENTER
Pressing the ENTER key numerical entries made using the SHIFT key
or deactivates a setting function.
Summary of Contents for NGMO1
