Safety Instructions
Safety sheet ii
9. Applicable local or national safety regulations
and rules for the prevention of accidents must
be observed in all work performed.
Prior to performing any work on the unit or
opening the unit, the latter must be discon-
nected from the supply network.
Any adjustments, replacements of parts,
maintenance or repair may be carried out only
by authorized R&S technical personnel.
Only original parts may be used for replacing
parts relevant to safety (e.g. power switches,
power transformers, fuses). A safety test must
be performed after each replacement of parts
relevant to safety.
(visual inspection, PE conductor test, insulation-
resistance, leakage-current measurement,
function test).
10. Ensure that the connections with information
technology equipment comply with IEC950 /
EN60950.
11. Lithium batteries must not be exposed to high
temperatures or fire.
Keep batteries away from children.
If the battery is replaced improperly, there is
danger of explosion. Only replace the battery by
R&S type (see spare part list).
Lithium batteries are suitable for environmentally
friendly disposal or specialized recycling. Dis-
pose of them in appropriate containers only.
Do not short-circuit the battery.
12. Equipment returned or sent in for repair must be
packed in the original packing or in packing with
electrostatic and mechanical protection.
13. Electrostatics via the connectors may damage
the equipment. For the safe handling and op-
eration of the equipment, appropriate measures
against electrostatics should be implemented.
14. The outside of the instrument is suitably cleaned
using a soft, lint-free dust cloth. Never use
solvents such as thinners, acetone or similar, as
they may damage the front panel labelling or
plastic parts.
15. Any additional safety instructions given in this
manual are also to be observed.
Summary of Contents for NGMO1
