R&S OSP
Instrument Functions
Graphical User Interface
Quick Start Guide 1505.3896.62 - 14
114
BACK
From any menu level, this key will bring you one level up in hierarchy.
MENU
From any menu level, this key will bring you directly to the Main menu.
5.3.4 Using the R&S OSP-B101/-B106/-B107/-B111
After selection of the R&S OSP-B101 module this dialog is opened.
With the cursor keys one of the six relays can be chosen, indicated by the blue color in
the relay name.
Pressing the
FUNCTION
key toggles the relay from NC to NO and vice versa. The
display of the switch in the dialog is changed accordingly.
Pressing the key
STATUS
toggles the selection of the relay.
A selected relay (K11 and K15 in this example) is displayed with a green surrounding.
All selected relays are taken over into a path configuration.
A non selected relay is not considered when defining a path configuration.
The operation as described above applies to further options of the R&S OSP as far as
the option has got a similar relay configuration. It will apply to the following modules:
Option
Relay configuration
R&S OSP-B106
3 x SPDT relay with N connectors, 12 GHz,
3 x SPDT relays with BNC connectors, 900 MHz / 2 A
R&S OSP-B107
6 x SPDT relay, solid state, 6 GHz
R&S OSP-B111
6 x SPDT relay, 40 GHz
Summary of Contents for OSP-B011
Page 132: ......
