R&S OSP
Instrument Functions
Graphical User Interface
Quick Start Guide 1505.3896.62 - 14
120
5.3.8 Using the R&S OSP-B121
After selection of the R&S OSP-B121 module this dialog is opened.
With the cursor keys one of the three relays can be chosen, indicated by the blue color
in the relay name.
Pressing the
FUNCTION
key toggles the relay from NC to NO and vice versa. The
display of the switch in the dialog is changed accordingly.
Pressing the key
STATUS
toggles the selection of the relay.
A selected relay (K11 and K13 in this example) is displayed with a green surrounding.
All selected relays are taken over into a path configuration.
A non selected relay is not considered when defining a path configuration.
5.3.9 Using the R&S OSP-B122, OSP-B122H and OSP-B133
After selection of the R&S OSP-B122, R&S OSP-B122H or R&S OSP-B133 module,
the following dialog is opened.
With the cursor up/down keys you can chose any terminal of that relay, indicated by
the blue color. In the above example the common terminal C is selected; all six
terminals are open.
Pressing the
FUNCTION
key closes the chosen relay position. With the Common
terminal chosen (“C” displayed in blue) the relay is opened. The display of the switch in
the dialog is changed accordingly.
Summary of Contents for OSP-B011
Page 132: ......
