Functions
R&S
®
OSP
202
User Manual 1178.7100.02 ─ 05
●
Only available for the
function and for
input
trigger signals at the
following connectors:
Figure 5-44: Trigger connectors
1 = BNC [Trigger A] for input, only
2 = BNC [Trigger B] for reset input (and prepared for future trigger output functions)
3 = D-Sub
9 (only on rear of R&S
OSP320) = [TRIGGER] input only for
The trigger functionality is especially useful for fast switching of
state relays (SSR). However, you can use the trigger for all supported modules in all
possible
configurations.
Some modules are not triggerable, for example R&S
OSP-B102L and R&S
OSP-
B112UL, due to their multi-position latching relays. For detailed information on compati-
bility of your modules with the trigger functionality, refer to the
dia-
log or to the data sheet.
Figure 5-45: Trigger dialog with activated single trigger
"Trigger Activation" and status information = see
"Trigger Type" and path information
= see
"Trigger Level" and "Trigger Slope"
= see
Configuration
