RC Commands
R&S
®
OSP
252
User Manual 1178.7100.02 ─ 05
Example:
SYST:HELP:SYNT? "ROUT:CLOS"
Response:
"ROUTe:CLOSe[?] <expression>|<string>"
Usage:
Query only
SYSTem:HELP:SYNTax:ALL?
Returns a string, separated by "\n", with all implemented SCPI commands and their
parameter types. Types are, e.g., block data, boolean, char data, expression, integer,
numeric value, string.
Usage:
Query only
SYSTem:DATE
Sets or queries the year, month and day of the internal calendar. The date format is the
comma-separated string
<year>,<month>,<day>
, with 4-digit year information.
The date command is not affected by a
*RST
command.
by a manipulation of the system date.
Manual operation:
See
SYSTem:TIME
Sets or queries the hour, minute and second of the internal clock. The time format is
the comma-separated string
<hour>,<minute>,<second>
with integer seconds and
0 to 24 hours.
The time command is not affected by a
*RST
command.
Manual operation:
See
SYSTem:VERSion?
Queries the implemented SCPI version.
Always returns the value "
1999.0
", which represents SCPI version 1.0 of 1999.
Usage:
Query only
8.3
ROUTe Commands
ROUTe
commands provide signal routing capabilities for the R&S
OSP and give access
to all available relays and I/O channels.
ROUTe Commands
