Remote Control Commands
R&S
®
NGL200/NGM200
161
User Manual 1178.8736.02 ─ 09
BATTery:SIMulator:CURRent:LIMit:EOC
<arg0>
BATTery:SIMulator:CURRent:LIMit:EOC?
Sets or queries the current limit at end-of-charge.
Parameters:
<arg0>
Sets the current limit at end-of-charge.
Example:
INST:NSEL 1
BATT:SIM:CURR:LIM:EOC?
Returns current limit at end-of-charge for channel 1.
BATTery:SIMulator:CURRent:LIMit:EOD
<arg0>
BATTery:SIMulator:CURRent:LIMit:EOD?
Sets or queries the current limit at end-of-discharge.
Parameters:
<arg0>
Sets the current limit at end-of-discharge.
Example:
INST:NSEL 1
BATT:SIM:CURR:LIM:EOD?
Returns current limit at end-of-discharge for channel 1.
BATTery:SIMulator:CURRent:LIMit:REGular
<arg0>
BATTery:SIMulator:CURRent:LIMit:REGular?
Sets or queries the current limit at regular charge level.
Parameters:
<arg0>
Sets the current limit at regular charge level.
Example:
INST:NSEL 1
BATT:SIM:CURR:LIM:REG?
Returns current limit at regular charge level for channel 1.
BATTery:SIMulator:RESistance?
Queries the battery simulator internal resistance (ESR).
Example:
INST:NSEL 1
BATT:SIMU:RES?
Queries channel 1 of battery simulator internal resistance.
Usage:
Query only
BATTery:SIMulator:SOC
<arg0>
BATTery:SIMulator:SOC?
Sets or queries the state of charge (SoC) of the battery simulator.
Advanced Operating Commands