Getting Started
R&S
®
NGL200/NGM200
19
User Manual 1178.8736.02 ─ 09
4.1.3
Unpacking and Checking the Instrument
Unpack the R&S
NGL/NGM power supply carefully and check the content of the pack-
age.
●
Check the equipment for completeness using the delivery note and package con-
tents list for the various items.
●
Check the instrument for any damage and loose parts. If there is any damage,
immediately contact the carrier who delivered the instrument.
Packing material
Retain the original packing material. If the instrument needs to be transported or ship-
ped later, you can use the material to protect the control elements and connectors.
Risk of damage during transportation and shipment
Insufficient protection against mechanical and electrostatic effects during transportation
and shipment can damage the instrument.
●
Always ensure that sufficient mechanical and electrostatic protections are provided
●
When shipping an instrument, the original packaging should be used. If you do not
have the original packaging, use sufficient padding to prevent the instrument from
moving around inside the box. Pack the instrument in antistatic wrap to protect it
from electrostatic charging
●
Secure the instrument to prevent any movement and other mechanical effects dur-
ing transportation
Delivery package
The package contents contain the following items:
●
R&S NGL power supply or R&S NGM power supply
●
Four power cables
●
One printed Getting Started manual
●
One document folder containing a printed Basic Safety Instructions guide
4.1.4
Setting Up the Instrument
The R&S
NGL/NGM is designed for benchtop and rackmount operation.
4.1.4.1
Bench Operation
On a benchtop, the R&S
NGL/NGM power supply can either lie flat or stand on its feet.
, feet on the bottom can be folded out to set the instrument in
an inclined position.
Putting into Operation
