Operating Basics
R&S
®
NGL200/NGM200
40
User Manual 1178.8736.02 ─ 09
Menus
Description
"Output"
Configures the output impedance, output delay time, trigger
actions and output mode (sink/source) of the output.
"Arbitrary"
Configures the arbitrary sequence, sequence repeatability
response and the sequence ending behavior.
"Ramp"
Configures the ramping time applied on the channel output.
"Battery Simulator"
Available only with option R&S NGM-K106.
Activation of the "Battery Simulator" function and edit new bat-
tery model data.
"Overcurrent Protection (OCP)"
Configures OCP protection settings ("Blowing Delay", "Initial
Delay" and linking channel) for the instrument.
"Overvoltage Protection (OVP)"
Configures OVP protection settings (OVP level) for the instru-
ment.
"Overpower Protection (OPP)"
Configures OPP protection settings (OPP power) for the
instrument.
"Ranges / DVM"
The "Ranges" function provides the voltage and current mea-
surement range settings. With correct range settings, it increa-
ses the accuracy of measurements.
The DVM is available only with option R&S NGM-K104. It pro-
vides an independent digital voltmeter to measure input volt-
age.
"Constant Resistance"
Configures the resistance used in the sink mode.
"Fast Transient Response"
Enables/Disables the "Fast Transient Response" function on
the channel output.
"Safety Limits"
Configures the voltage and current limit of the channel output.
5.3.1.3
User Key
The [
*
] key provides a shortcut function to one of the followings:
●
screenshot
●
trigger
●
data logging
●
reset statistics
●
toggle touchscreen input
The shortcut key is configurable in the "Device" > "User Button" menu. See
5.3.2
Navigation Controls
Navigation in the menu and setting of values can be done via rotary knob and [Back]
key.
Front Panel Keys