Instrument Functions
R&S
®
NGL200/NGM200
81
User Manual 1178.8736.02 ─ 09
4. Select the file that you want to copy or delete.
5. Select the required action in the file manager dialog.
.
6. To view the selected file information, long-press on the selected filename in the file
manager dialog.
A pop-up message box is displayed with the file information.
Figure 6-34: File information
Table 6-6: File manager action
Action
Description
Copy from internal memory to USB.
Copy from USB to internal memory.
Delete the selected file.
6.15
Store and Recall
Upon power-up, the instrument loads the last stored settings from internal memory
location. Auto saved parameters are also applied during startup.
The R&S
NGL/NGM output states of all channels (Ch1, Ch2) are disabled when the
recall function is activated.
Auto saved instrument settings
Auto saved of the instrument settings is applied when any of the following parameters
are changed:
●
Chapter 6.17, "General Instrument Settings"
●
USB connection mode
●
Ethernet settings
Store and Recall
